One of the important stages of construction and operation is the alignment of the foundation (and load-bearing walls) of buildings or its parts (corners, extensions). This ensures even support of the house without distortions, cracks and other problems that may occur due to the unevenness of the foundation or foundation (foundation soil). However, there are often situations when the building has already been erected, but over time the roll of the house (wall) or foundation was discovered.
Lifting the foundation (and adjacent structures) of the house should be performed at the first signs of subsidence of the foundation. This will avoid further problems, namely: the appearance of cracks, rolls, sags, skew doorways and curvature of the floor. It is not necessary to delay with repair of the base, after all in that case there can be an emergency situation which will demand considerable time for its decision and big means, not to mention threat to life and health of inhabitants.
You can order alignment of designs of the base of the building or construction on our website. We make alignment of the existing concrete and reinforced concrete (monolithic) bases, and also tape, plate and columnar. From a brick, blocks, a stone (rubble bases) and other materials. Subsidence and subsidence of the foundation and associated structures is not a problem if geopolymer technologies are used to solve it.
GeoResin technology - fast, reliable, high quality.
GeoResin DEEP Lifting technology allows to level and lift the base without carrying out long earthworks. It is known in more than 80 countries around the world and today is actively gaining popularity in Ukraine. The technology is based on the introduction of geopolymer resins into the soil, which rapidly expand with a force of up to 10 MPa, harden and, forming a vertically directed pressure, strengthen the base and foundation. At this point, the foundation rises to the required height. It should also be noted that the two-component geopolymer resins used have a service life of more than 60 years, do not affect the environment and are not exposed to fungi and bacteria.
Damage to load-bearing structures
Stopping deformations and strengthening the base
Uneven sags, cracks
Stabilization of the foundation of the building
Slab slab settlement, slab crack and voids under slab
1. Stabilizing the soil at the base of the floor slab 2. Filling the voids under the slab 3. Raising the floor to a predetermined level
Unstable railroad scales
1. Stabilization of the soil at the base of the foundations of the railway scales 2. Stabilization of the soil at the base of the part of the foundations…
Settlement of the columns of the building frame, cracks in the walls and partitions
Soil stabilization at the base of the frame strip foundations
Uneven settlement of the floor slab in the living area up to 27 mm
1. Compaction of the soil directly under the slab and at a depth of 2 Raise the floor slab to the design level.
Cracks on the surface of the blind area, sediment of the blind area, wetting of the basement walls.
1. Filling the voids under the blind area 2, Compaction of the backfill soil 3. Stabilization of the blind area and skylights 4. Leveling the blind area
Numerous cracks in walls and partitions; ground floor slab settlement
1. Stabilizing the soil at the base of the foundations 2. Raising self-supporting brick walls to close cracks 3. Filling the voids under the floor slab
Numerous horizontal, vertical, oblique cracks in brick walls and partitions; ground floor slab settlement
1. Stabilization of the soil at the base of the foundations of the outer and inner walls 2. Raising the floor slab to the design level
Insufficient bearing capacity of the base
A reinforced system was formed in the soil massif
Damage and uneven subsidence of supporting structures from 10 to 42 mm
Homes have been re-aligned within tolerance
The house sinks into the ground. Cracks around the entire perimeter of the building
The foundation soils under the property have been reinforced and provided with integral support
Efficiency and effectiveness
Extended minimum warranty terms
Fantastic productivity and speed
Quick material curing time
Accuracy at every stage of works