ua
ru
en

We work throughout Ukraine

GeoResin METHODS

Thanks to the modern methods of the GeoResin company in Ukraine, soil reinforcement of the base is ensured and structures and structures are aligned with an accuracy of one millimeter. The lifting of structures, as a process, does not depend on the design or actual pressure of the structure and is carried out under the control of ultra-precise equipment, which eliminates the formation of adverse deformations.

LIFTING THE FOUNDATION AND SEALING OF SOILS BY THE DEPTH INJECTION METHOD

DEEP Lifting technology will help to restore the bearing capacity of the foundation and foundation soils in the shortest possible time without excavation and excavation work. This technology expands the scope of application, both for private houses and for industrial facilities at various stages of construction, as well as during the operation of the facility without stopping production.

If you want to study the technology of parts with scientific calculations and technical descriptions (in the original), then go to the GeoResin technical library.

DEEP Lifting

The floor sagged, cracks appeared in the walls and the foundation, or the house gave a roll - this means that the building began to collapse. The reason for this could be: errors in the design, poorly performed construction work, decompression of the soil of the base, etc.
Advantages of the method
1.
Technological features make it possible to carry out work in compressed conditions, in hard-to-reach places, with minimal noise and vibration effects.
2.
The technology makes it possible to strengthen the soil in the necessary places. Relevant in case of technogenic impacts on the base during operation.
3.
A high level of control of the work performed, including control of the volume of the consolidated soil mass.
The method consists in the precise introduction of a two-component polymer resin into the soil under pressure. As a result, the base is compacted, voids are filled and moisture is displaced from the pores. Thanks to further point injections of the polymer, the foundation rises to its previous level and its bearing capacity increases

Floor LIFTING

The concrete slab of the floor sank or cracked - this situation can occur with improper design, insufficient thickness of the slab, excessive load on it or leaching of the soil.

STABILIZATION AND LIFTING OF PLANE REINFORCED CONCRETE STRUCTURES

Floor LIFTING technology will stop the subsidence of the slab and raise the structure to the design level, significantly increasing the bearing capacity of the base. This is an ideal solution for carrying out restoration work in warehouses, logistics centers, office buildings, infrastructure facilities - roads and runways of airfields.

If you want to study the technology of parts with scientific calculations and technical descriptions (in the original), then go to the GeoResin technical library.

ADVANTAGES OF THE METHOD
1.
The equipment, work methods and materials used are aimed at minimal interference with the existing ensemble, make it possible to carry out work without stopping production processes at the enterprise.
2.
High level of control of the lifting of the structure (up to 1mm). Fully restores the contact between the structure and the base.
3.
Waterproofing the structure from the base side. Reduces vibration susceptibility or exude. Increases the thermal insulation properties of the base.
The technology implies the introduction of a special geopolymer composition under the base plate using thin steel tubes - packers. The expansion of the composition is already in the first minute. As a result, the soil under the base is compacted, and the base itself rises to the design level. The bearing capacity of the base increases.

Strengthening and stabilizing the foundation on the weak soils

Column Injection technology allows to achieve strengthening and stabilization results even in presence of watered and very weak soils with voids. Geopolymer piles are an excellent alternative to traditional soil compaction methods or piling. This method allows to work under an existing building and is suitable for all types of structures and soils.

If you want to study the technology of parts with scientific calculations and technical descriptions (in the original), then go to the GeoResin technical library.

Column Injection

Your house, warehouse or office is standing on weak ground and is already beginning to subside - that means that there was a decompression or washing out of the soil, voids and water volumes formed under the foundation. You will urgently need to strengthen the soil and restore the load-bearing capacity of the building foundation.
ADVANTAGES OF THE METHOD
1.
Possibility of installing geopolymer piles or columns in hard-to-reach places with instant load transfer.
2.
High bearing capacity along the lateral surface due to the roughness of the pile walls or the column "embedded" in the ground of the base.
3.
During the process of constructing a structure, technological (additional) settlements of the structure do not occur.
During the performance of the project injection materials pump into kevlar shells inserted into the ground to a depth of up to 6 meters. After that the material expands and hardens forming a pile that works both on the side surface friction and on the direct load force. Thereby the bearing capacity of the foundation increases.

BENEFIL

Quite often it is necessary to carry out conservation of an old collector or underground pipeline, an abandoned mine or tunnel. Traditional methods are too expensive or do not allow to perform the task at high-quality level with long-lasting guarantee. GeoResin has the innovative solution for you.

Filling the voids and big volumes with lightweight resins

BENEFIL is the resin for injection technology that allows to perform the conservation task of old reservoirs, pipelines and mines quickly and efficiently in accordance with existing construction regulations. This is a convenient alternative to flooding with water or pouring concrete. The polymer composition used for the preservation of voids has a small specific weight and at the same time has sufficient strength with high fire-proof characteristics. Injection of the compound can be made to hard-to-reach areas and avoiding earthworks.

If you want to study the technology of parts with scientific calculations and technical descriptions (in the original), then go to the GeoResin technical library.

ADVANTAGES OF THE METHOD
1.
Vast field of implementation - we can securly fill any void or tank underground. Mines, tunnels, culverts, thanks, shafts or cavities.
2.
The polymer is completely safe for the environment. Flame retardant and can be recycled for reuse.
3.
Ability to put back the object when it is get necessary. Reversable process. Has the ability to absorb residual liquids and gases.
The material is injected under pressure. At the same time, a workstation with a stock of equipment can be located within a radius of up-to 100 meters from the injection site. During the process the sub-composition expands in volume in several times(up-to 70) with complete filling the technical gaps.
Completed projects
Thank you for your comment!
Close

Leave your phone number and our consultant will contact you

Choose a convenient time to call

Leave your email and we will send you this article

  • Services
  • Technologies
  • Portfolio
  • Video
  • Technoblog
  • About us
  • Contacts
  • GeoResin